Toll Free: (866) 398-9357 (when calling from outside Arizona only)  Phone: (480) 814-8300
Cart 0 Item Items (empty)

No products

Shipping & Handling
US$ 0.00 Total

Check out

Product successfully added to your shopping cart

Quantity
Total

There are 0 items in your cart. There is 1 item in your cart.

Total products
Total shipping & handling 
Total
Continue shopping Proceed to checkout

How to Apply



Dazzle Dry application technique simplified  

Tips prior to application:

  • Base Coat MUST be clear like water. If cloudy, has sediments or is jelly-like, immerse the tightly closed bottle in a bowl of warm water until Base Coat becomes clear before using.
  • Start with a clean, manicured and dry nail plate that has been lightly buffed using a fine grit (240 or higher) buffer.
  • Avoid contact of Base Coat, Nail Lacquer and Top Coat on the eponychium and side walls to prevent product lifting.
  • Make sure the Lacquer and Top coat are the desired viscosity by using Dazzle Dry Thinner.

Application Steps:

  1. Saturate a lint-free cotton pad with Nail Prep and scrub each nail, removing ALL remnants of oil, lotion and other contaminants. Use 1 cotton pad per hand to avoid transfer of oils from one hand to the other, ensuring optimum cleanliness of the nail plate prior to polish application.
  2. Generously apply Base Coat by dipping the brush in the bottle for each nail and swiping excess product on the inner neck of the bottle. Encapsulate the free edge of each nail with the Base Coat. Allow to dry matte prior to applying next coat.
  3. Repeat step #2 with the second coat of Base Coat. Allow to dry matte prior to applying color.
  4. Apply the first coat of Nail Lacquer thinly. The second coat may be applied generously by dipping brush in bottle for each nail and swiping excess product on the inner neck of the bottle. Least amount of pressure on the brush with fewer brush strokes is most effective with the Lacquer for smoothest application. Encapsulate the free edge of each nail with the Lacquer.
  5. Generously apply Top Coat by dipping the brush in the bottle for each nail and swiping the excess product on the inner neck of the bottle. Use the tip of the brush to glide over and burst any air bubbles that may have formed. Encapsulate the free edge of each nail, sealing in all the layers.
  6. Wait 5 minutes and voila - polish is rock-hard.