Joan's Armor

Step 1: Nail Prep Scrub each nail with a lint-free pad thoroughly to remove any oils or lotions.

Step 2: Base Coat Apply two layers to each nail, allowing each coat to dry matte. If Base Coat is cloudy or jelly-like, stand the bottle in one inch of hot water until the product becomes clear. **Do not microwave or submerge in water. 

Step 3: Lacquer Apply two layers of Nail Lacquer to each nail, allowing each layer to dry matte. **Avoid contact with cuticles and skin to prevent lifting.

Step 4: Top Coat Apply one layer of Top Coat to each nail after the Lacquer has dried matte. Wait five minutes—your manicure is done!

+Revive: Add 6-8 drops of Revive to a Top Coat, Transform, or Nail Lacquer whose consistency is too thick. Add more if necessary. 

**DO NOT add Revive to a Base Coat. It will ruin the product. Store with original cap to prevent evaporation from occurring.

Butyl Acetate, Ethyl Acetate, Cellulose Acetate Butyrate, Isopropyl Alcohol, Stearalkonium Hectorite, Propyl Acetate, Stearalkonium Bentonite, SDA 40B, Isobutanol, Propylene Carbonate, Dipropyleneglycol Dibenzoate, Aqua, Urea-Modified Polyamide, Octocrylene, Sunflower Oil/Maleic Anhydride Copolymer, Phenoxyethanol, Bis-PEG/PPG 20/20 Dimethicone, Cyclohexasiloxane, Citric Acid, Tosylamide/Epoxy Resin, Polyisobutyl Methacrylate, Maleic Acid, Cyclopentasiloxane, Fragrance. May contain: Blue 1, Ext. Violet 2, Titanium Dioxide, Black 2.

Dibutyl Phthalate (DBP), Toluene, Formaldehyde, Formaldehyde Resin, Camphor, Triphenyl Phosphate (TPHP), Butyl Benzyl Phthalate, Ethyl Tosylamide, Xylene, Nitrocellulose, Parabens, Sodium Lauryl Sulfate, Nitric Acid, Sulfuric Acid, Acrylates, Monomers, MEK, Isocyanates, Anhydrides, Thiocarbamates, Peroxy Compounds, Hydrazines