REVIVE
Our signature formula for restoring the consistency of Dazzle Dry Top Coat and Nail Lacquers that have become thick from the natural evaporation of solvents.
To Use: If Top Coat or Nail Lacquer is thick add 6-8 drops of Revive. Add more if necessary. Do NOT add Revive to Base Coat as it will ruin the product.
EVAPORATION ALERT: Do NOT store Revive with the dropper as this will allow the product to evaporate. Revive should only be stored with the original cap tightly screwed on.
Thickness is easily remedied by using 6-8 drops of REVIVE to reconstitute the POLISHES, TOP COAT, and MATTIFY to the desired viscosity; 4-6 drops in TRANSFORM.
• Add more REVIVE if needed.
• You can shake the POLISH bottle well after adding 6-8 drops of REVIVE. You may use an electronic shaker if you have one.
• Don’t shake the TOP COAT or MATTIFY; roll the bottle in one direction for about 1 minute until REVIVE is well- blended.
• You can over-thin by adding too much REVIVE at a time, but you will not ruin them. We suggest adding 6-8 drops at a time until desired viscosity is achieved. If you accidentally over-thin, leave the cap off for a few minutes until the volatile solvents escape.
• Some densely pigmented colors get thick faster than others. For example, when using our Black Midnight Express, you may need to add Revive before applying the second coat. Remember, this is normal and ok to do if need be. Do not fear Revive.
Ethyl Acetate, Butyl Acetate, Propyl Acetate and Isopropyl Alcohol.
Dibutyl Phthalate (DBP), Toluene, Formaldehyde, Formaldehyde Resin, Camphor, Triphenyl Phosphate (TPHP), Butyl Benzyl Phthalate, Ethyl Tosylamide, Xylene, Nitrocellulose, Parabens, Sodium Lauryl Sulfate, Nitric Acid, Sulfuric Acid, Acrylates, Monomers, MEK, Isocyanates, Anhydrides, Thiocarbamates, Peroxy Compounds, Hydrazines
