White Stamping Lacquer

Follow all the steps for Dazzle Dry Nail Prep, Base Coat, and Polish, and allow 3-4 minutes for it to dry. Do NOT apply Top Coat.
- Select your desired stamping plate pattern.
- Generously coat the desired pattern with Dazzle Dry Stamping Polish.
- Hold the scraper to the stamping plate at a 45° angle. Lightly scrape off the excess Stamping Polish. You don’t
need to apply too much pressure here and scrape only once.
- Quickly apply the jelly stamper to the coated pattern in a rolling motion one time from side to side to pick up the polish. Do not press the stamper but instead, allow its own weight to apply the pressure on to the plate.
- Align the design over the nail you want to stamp, and roll the jelly stamper once, from side to side, to transfer the pattern
- Remove excess Stamping Polish on the surrounding skin using tape. Use a detail brush and acetone to finish the clean-up.
- Allow the design to dry for 3-4 minutes, and then apply a generous layer of Dazzle Dry Top Coat.

Butyl Acetate, Ethyl Acetate, Isopropyl Alcohol, Cellulose Acetate Butyrate, Propyl Acetate, Stearalkonium Bentonite, Stearalkonium Hectorite, Dipropylene Glycol Dibenzoate, Propylene Carbonate, SDA 40B, Octocrylene, Tosylamide Epoxy Resin, Polyisobutyl Methacrylate. May Contain: Red 34 Lake, Red 6 Lake, Red 7 Lake, Black 2, Iron Oxides, Yellow 5 Lake, Ferric Ammonium Ferrocyanide, Titanium Dioxide, Mica, Synthetic Fluorphlogopite, Bismuth Oxychloride, Calcium Sodium Borosilicate, Tin Oxide, Aluminum Powder, Aluminum Hydroxide, Red 28 Lake, Yellow 6 Lake, Chromium Hydroxide Green, Magnesium Stearate.

Dibutyl Phthalate (DBP), Toluene, Formaldehyde, Formaldehyde Resin, Camphor, Triphenyl Phosphate (TPHP), Butyl Benzyl Phthalate, Ethyl Tosylamide, Xylene, Nitrocellulose, Parabens, Sodium Lauryl Sulfate, Nitric Acid, Sulfuric Acid, Acrylates, Monomers, MEK, Isocyanates, Anhydrides, Thiocarbamates, Peroxy Compounds, Hydrazines